• Product Description
    Company Info.
    <
    >
    <
    >
    Basic Info.
    Model:
    QC-607A
    Processing customization:
    No
    Overall dimension:
    224*124*95 mm
    Weight:
    13 ㎏
    Product use:
    Sponge foam compression permanent deformation tester is a
    Measuring range:
    50-90
    working power supply:
    220
    power:
    5KW
    clamp:
    Standard set
    material:
    stainless steel
    test temperature:
    70 degrees
    Product Description

    Sponge foam compression set tester is an instrument used to determine the compression set of foam plastics. It is usually composed of parallel steel plates, limiters and fasteners, and meets the requirements of GB/T 6669-2008 ISO 1856:2000 "Determination of compression permanent deformation of flexible foamed polymeric materials". At the specified temperature, the foam material sample shall maintain constant deformation for a certain time, and observe the effect of deformation on the test thickness after the sample recovers for a period of time. The compression set of foam is expressed as a percentage of the ratio of the difference between the initial and final thickness of the specimen to the initial thickness of the specimen.

    The working principle of the sponge foam compression permanent deformation tester is: put the sponge foam sample in the compression device, apply a certain pressure, and keep it for a period of time, so that the sample produces compression permanent deformation. Then, the pressure is removed, the specimen is allowed to recover for a period of time, its thickness is measured again, and the compression set rate is calculated.

     

    Sponge foam compression set tester Components:

    1. Sample preparation device: This device can cut and prepare sponge foam samples of a certain size for subsequent testing.

    2. Compression device: This device can apply a certain pressure to simulate the compression force that sponge foam is subjected to in actual use.

    3. Measuring device: This device measures the thickness of the specimen before and after compression to calculate the compression set.

    4. Temperature control device: This device can control the temperature of the test environment to ensure the accuracy and reliability of the test results.


    Technical parameters of sponge foam compression set tester:

    1. Temperature range: normal temperature ~200℃.

    2. Oven size: 350 350 350 mm.

    3. Power: 5kW.

    4. Voltage: 1 ‰, AC 220V, 14.5A.

    5. A set of compression fixtures, compression ratio of 50%, 75%.

    6. Test temperature: 70℃.

    7. Test time: 22H.

    8. Specimen size: 50mm x 50mm x 25 mm.

    9. Fixture size: 224*124*95mm

    10. Operating voltage: 220V


    The sponge foam compression set tester is used as follows:

    1. Prepare samples according to standard requirements, generally using sponge foam strips or square samples.

    2. Place the specimen in the compression device and ensure that it is centered.

    3. Set the required pressure and time parameters and start the test procedure.

    4. During the test, observe and record the compression set of the specimen.

    5. At the end of the test, remove the specimen and measure its initial thickness and final thickness.

    6. The compression set rate is calculated from the initial thickness, * final thickness and compression rate.

    Sponge foam compression set tester has wide application value in quality control, material development and product performance evaluation. It can provide important information about the elastic properties and resilience of foam materials, thus helping to evaluate their performance in actual use.

    Know Your Supplier
    Name（chinese）
    东莞市品检仪器设备有限公司
    Name（English）
    Dongguan city quality inspection instrument and equipment co., ltd
    China credit code
    91441900086798091D Identity Verification
    Registered Capital
    300,000 CNY
    Operating term
    2013-12-19 ~ ****
    Product Category
    Tensile and pressure testing machine seriesSponge and foam testing machine seriesSwitch button potentiometer life testing machineDaily consumer goods testing
    Company Registered Address:
    101-102, No. 82, Xiyuan Street, Lincun, Tangxia Town, Dongguan city
    Address
    Dongguan, Guangdong, China
    Nearby port
    Shenzhen,Guangzhou
    Since its establishment in 2013, Dongguan city Quality Inspection Instrument and Equipment Co., Ltd. has manufactured and produced: Wire bending testing machine, copper wire elongation testing machine, alcohol eraser wear testing machine, button life testing machine, microcomputer insertion force testing machine, precision salt water spray testing machine, simulated transportation vibration table, plug wire burst testing machine, terminal wire weight static lifting testing machine, ball falling impact testing machine, fully automatic insertion force testing machine, constant temperature and humidity testing chamber, cold and hot impact testing machine and other equipment, With its excellent quality and excellent services, it has developed rapidly and has become a professional manufacturer capable of independent production, research and development and sales. It has a team of talents with superb production and manufacturing skills and a complete management system, from product material selection, processing process, performance testing, and after-sales service, strictly controls at all levels and division of labor is in place to ensure that satisfactory products are provided to various manufacturers and distributors. Products are manufactured in strict accordance with ISO, ASTM, AATCC, TAPPL, UL, VDE, IEC, ANSI, ASME, CSA, JIS, BS, EN, DIN, SATRA, GB, CNS and other domestic and international standards. Now the company is moving towards the goal of "zero defects" to eliminate the generation and sales of defective products, so that customers from all walks of life can buy with confidence and use them effectively, and strive to become a well-known company in the same industry. The products produced include mobile phones, computers, electronic and electrical appliances, wires and cables, optical fiber cables, plastics, rubber, packaging, paper products, auto parts, metals, hardware, casting and other testing equipment. The products are well received by manufacturers and are exported at home and abroad. The company is located in the important town of Tangxia, Dongguan. The company has complete production equipment, superb technical strength and good quality awareness. In line with the working concepts of reputation, quality, keeping up with the times, and being advanced, the company provides customers with novel and satisfactory products. The company adheres to the operating policy of "people-oriented and customer-oriented" and is willing to cooperate and negotiate business with all new and old customers in the society. Provide customers with satisfactory and high-quality products and services, and put forward valuable opinions.
    Company Profile
    Name（chinese）
    东莞市品检仪器设备有限公司
    Name（English）
    Dongguan city quality inspection instrument and equipment co., ltd
    China credit code
    91441900086798091D Identity Verification
    Registered Capital
    300,000 CNY
    Operating term
    2013-12-19 ~ ****
    Product Category
    Tensile and pressure testing machine seriesSponge and foam testing machine seriesSwitch button potentiometer life testing machineDaily consumer goods testing
    Company Registered Address:
    101-102, No. 82, Xiyuan Street, Lincun, Tangxia Town, Dongguan city
    Address
    Dongguan, Guangdong, China
    Nearby port
    Shenzhen,Guangzhou
    Since its establishment in 2013, Dongguan city Quality Inspection Instrument and Equipment Co., Ltd. has manufactured and produced: Wire bending testing machine, copper wire elongation testing machine, alcohol eraser wear testing machine, button life testing machine, microcomputer insertion force testing machine, precision salt water spray testing machine, simulated transportation vibration table, plug wire burst testing machine, terminal wire weight static lifting testing machine, ball falling impact testing machine, fully automatic insertion force testing machine, constant temperature and humidity testing chamber, cold and hot impact testing machine and other equipment, With its excellent quality and excellent services, it has developed rapidly and has become a professional manufacturer capable of independent production, research and development and sales. It has a team of talents with superb production and manufacturing skills and a complete management system, from product material selection, processing process, performance testing, and after-sales service, strictly controls at all levels and division of labor is in place to ensure that satisfactory products are provided to various manufacturers and distributors. Products are manufactured in strict accordance with ISO, ASTM, AATCC, TAPPL, UL, VDE, IEC, ANSI, ASME, CSA, JIS, BS, EN, DIN, SATRA, GB, CNS and other domestic and international standards. Now the company is moving towards the goal of "zero defects" to eliminate the generation and sales of defective products, so that customers from all walks of life can buy with confidence and use them effectively, and strive to become a well-known company in the same industry. The products produced include mobile phones, computers, electronic and electrical appliances, wires and cables, optical fiber cables, plastics, rubber, packaging, paper products, auto parts, metals, hardware, casting and other testing equipment. The products are well received by manufacturers and are exported at home and abroad. The company is located in the important town of Tangxia, Dongguan. The company has complete production equipment, superb technical strength and good quality awareness. In line with the working concepts of reputation, quality, keeping up with the times, and being advanced, the company provides customers with novel and satisfactory products. The company adheres to the operating policy of "people-oriented and customer-oriented" and is willing to cooperate and negotiate business with all new and old customers in the society. Provide customers with satisfactory and high-quality products and services, and put forward valuable opinions.
  • Send your message to this supplier
    *From:
    *To:
    Mr. lisanbao
    *Message:
About UsTerms of ServicePrivacy PolicyContact Us

Copyright © 2003 - 2025 Goepe.com All rights reserved.

浙公网安备 33011802000480号